In french : “Sauvons le patrimoine informatique !”

Jul 17, 2008 by admin in Uncategorized


Communiqué : Attention : Patrimoine en danger !

Paris, le 09/07/2008,

Depuis plus de 10 ans, les collectionneurs fondateurs de l’association MO5.COM ont assemblé une des plus
grandes collections d’Europe, dédiée à l’histoire de l’informatique et des jeux vidéo. Ils la font vivre
au travers d’expositions interactives ouvertes au public tout en préparant son avenir dans un futur musée.

Mais cette collection est aujourd’hui menacée : Des défauts ont été relevés par une commission de sécurité
dans les locaux où elle est conservée depuis cinq ans, dans les sous-sols d’un collège de la région parisienne,
aménagés par nos soins. En raison des risques d’incendie, cette commission a demandé le départ des 30.000 pièces
qui composent la collection. Or l’association, composée de bénévoles, ne dispose ni de l’espace nécessaire
pour entreposer cette collection ailleurs, ni de moyens suffisants pour assurer son transport.

Si nous ne trouvons pas de solution rapidement, ce sont des milliers de machines, livres, magazines, logiciels
et d’objets divers témoins de l’histoire de l’informatique qui risquent la destruction. Cela représenterait une
perte patrimoniale majeure au niveau national. Plus que jamais, nous avons besoin d’aide et d’appuis politiques
pour faire comprendre aux institutions l’importance de nos travaux de préservation de ce patrimoine !

Vous aussi vous pouvez nous aider !
Avec les moyens qui sont à votre disposition – forums, blogs, mail –, vous pouvez informer le public.
Si vous habitez Paris ou la région parisienne, vous pouvez nous prêter main-forte le week-end pour nous aider
à préparer notre déménagement. Peut-être connaissez-vous quelqu’un disposant d’un local qui pourrait être mis
à la disposition de l’association pour son travail.

Venez exprimer votre soutien à notre cause, la préservation du patrimoine informatique et vidéoludique,
sur le site http://soutien.mo5.com . Vous pourrez y suivre en direct le destin de notre collection.

À propos de MO5.COM:
MO5.COM est une association loi 1901 à but non-lucratif dédiée à la préservation du patrimoine informatique et vidéoludique. Elle prépare un projet d’institut national dédié aux sciences numériques, à leur utilisation et à leur sauvegarde. MO5.COM entretient une collection de plus de 30.000 ordinateurs, consoles, logiciels, magazines et manuels. L’association met régulièrement en place des expositions interactives présentant divers aspects de l’histoire de l’informatique et des jeux vidéo. MO5.COM réunit également plus de 3000 passionnés à travers son site web communautaire.

Contact :
Association MO5.COM
44 Bld Magenta
75010 Paris
Email : association@mo5.com
Mobile : 06.09.56.07.38

 

Techni Musique Synthétiseur Vocal (French vocal synth for Commodore 64)

Dec 14, 2007 by admin in Commodore 64, speak, speech, synth, vocal, voice


Here is the Techni Musique Synthétiseur Vocal for Commodore 64

Build in 1984 by the french company Techni Musique based in Clermont-Ferrand.
This unit has also been massively produced for the Amstrad 464/6128 and distributed in primary schools with the “Plan informatique pour tous”.
Unfortunately the Commodore 64 hadn’t a big success in France so this Commodore 64 version seems to be quite rare!


It plugs into the cartirdge port of the Commodore 64/128 and features 2 audio outputs.



Here are the 3 files i’ve been able to backup from the floppy which came with the unit :
http://stamba.free.fr/c64/tm/Techni_Musique_Synthe_Vocal_for_Commodore64_Demo_disk.rar

It seems these files are only the demo disk but a Yago from #c-64 on ircnet helped me to understand what the program do and what could be typed to input datas to the vocal synth.


It uses phonemes and I don’t have the phonemes list so it will be quite hard to find them out !
Have to check the list shown in the demo.. maybe it’s the phonemes list !

Here is what you have to do while running the demo to input your own datas :
[16:57] <yago> well, poke stores a value into memory, and sys and usr call machinelanguage programs
[16:59] <yago> after then program started, stop it, and try to enter e.g. line 24020 (without linenumber)
[16:59] <yago> then the cart should speak
[16:59] <yago> then fiddle with the parameters for poke2,X and a=usr(Y)
[17:03] <yago> then poke 2,65
[17:03] <yago> return
[17:03] <yago> then sys39000
[17:03] <yago> return
[17:03] <yago> then a=usr(50)+usr(0)+usr(0)
[17:03] <yago> RUN

And it works ! Thanks for this help :)

And finally…. here is a record of the demo !
http://stamba.free.fr/c64/Techni_Musique_Synthe_Vocal_Demo_Commodore64-rec_stamba.mp3

Conclusion ? IT BLASTS ALMOST all other c64 vocal synths of this period.. Commodore Magic Voice is maybe the worst.. Currah Sound Speech is average.. but this Techni Musique one reach modern (2007! vocal synthesis) !

Q1 : HELP !! Do you have this unit ? Do you have the floppies ? The manual ? The box ! We need more informations about it ! .. Even the Amstrad 464/6128 version could be helpful ! ;)


Commodore Sound Sampler (with SX64)

Nov 22, 2007 by admin in Commodore 64, sampler


 

Here is the Commodore Sound Sampler (1985) used on a Commodore SX64 executive computer !

Yes ! This little (BIG) cartridge is a sampler for Commodore64/128 computers.Just received this one after MONTHS looking for one… and it works !

Here is the 1st sample i’ve been able to record :

http://stamba.free.fr/c64/sampler/commodore_sound_sampler_test_-_silicium.mp3

And for those who had the interface but no floppy or tape for this unit,
here is the .d64 file :
http://stamba.free.fr/c64/sampler/sfx-soundsampler.zip

And finally.. you can find the whole documentation (few pages) there :
http://www.cbmhardware.de/misc/sfxcart.php

Q1 :  How can I get my saved samples on a C64 floppy to my modern PC and sequencer ?
You’ll need a 1541(-II) or 1570/1571 floppy unit attached to the // port of your PC and run StarCommander under DOS (works great under Freedos, with both EPP/ECP // port allowed).
Once you got the file (the sample is a .prg file) back on your PC… Just rename the file as .raw and open it with Soundforge, it will ask you preferences to open the .raw file, set this : 8 bits / unsigned / 22khz
Last few things to do… cut the beginning and the end of the sample which are relative to the c64 software, your audio data is in the middle, resample at 16khz.. and you’re done :)


Moog Song Producer – Midi Interface for Commodore64

Oct 11, 2007 by admin in Commodore 64, Midi, Moog

Moog Song Producer MIDI and Trigger interface for the Commodore 64, with sequencing and MIDI-processing software. The Moog Song Producer boasts:

· 1 MIDI in
· 1 MIDI thru
· 4 MIDI outs
· 8 drum trigger outs
· 2 Footswitch ins
· 1 Clock/sync in
· 1 Clock/sync out

Unfortunately i just have the interface itself, no documentation, no manual.
I’ve found the floppy online and here it is : http://stamba.free.fr/c64/moog_song_producer_d64.rar

The softwares are pretty “obscure” without the manual. After many research on google and c64, moog, midi forums.. still no luck to find it as .pdf or even plain .txt file ! So…

Q1 :  Is anybody able to scan the BIG (+/- 200 pages) manual ? Yes.. quite a task but would be damn useful !


Syntron Digi-Drum for Commodore64

Oct 03, 2007 by admin in Commodore 64

This is the Syntron Digi-Drum, an external hardware (+ software) plug-in unit that turns the Commodore 64 into a drum machine with simple sequencing software. The unit plugs in to the Userport and has a jack output which plugs into an amplifier (the right leads will connect it to your Hi-Fi i.e. jack to RCA). If you have a commodore monitor you can connect it to the audio-in on that.”

Check the mp3 !

Syntron Digi-Drum for Commodore64

Q1: Hey guys ! Do you have the floppies for this item  ?
I’ve been unable to backup the whole floppy as there is some mould on the surface.. Anyway, here is the file :

Syntron Digi-Drum floppy #1

Q2: There is a “Trigger out” rca plug, any idea how to use it with other equipment ?
There is not much about this feature in the documentation…

Documentation will be added soon as a .PDF file…


Hello World !

Oct 03, 2007 by admin in Uncategorized

Got piece of unusual gear you’ve found at a garage sale or own on e(vil)Bay but you miss the manual, the floppies, the cable… Send us an email and we’ll try to find some informations by posting it on this blog !

Admin